top of page
Publications ,Projects and Patents


  1. 江茂雄、簡禦偉、李聯旺「閥控液壓缸系統節能控制與軌跡控制之整合研究」,機械月刊,第323期,第23-29頁,2002。

  2. 江茂雄、李聯旺、黃國修,「大行程高出力次微米精度之液壓-壓電混合定位系統設計與控制」,機械月刊,第352期,第41-48頁,2004。

  3. 江茂雄、陳宗傑、李聯旺,「場控匯流排於工業自動化之應用」,機械月刊,第353期,第54-59頁,2004。

  4. Mao-Hsiung Chiang, Lian-Wang Lee, Jin-Jiang Tsai, The Concurrent Implementation of High-Velocity Control Performance and High Energy Efficiency for Hydraulic Injection Moulding Machines, International Journal of Advanced Manufacturing Technology, vol.23, pp.256-262, 2004. (SCI, Impact Factor: 3.4) 已被引述20次,不含自我引述

  5. Mao-Hsiung Chiang, Dung-Di Yu, Lian-Wang Lee, Parallelregelung Der Bahnsteuerung Mit Energiesparungsregelung Für Einen Ventilgesteuerten Hydraulischen Zylinderantrieb Mit Robustem H∞-Optimalem Regler, (Robust H∞ Optimal Control for Parallel Control of Path Control and Energy-Saving Control on Hydraulic Throttle-Controlled Systems), Ölhydraulik und Pneumatik, 5/2005, pp.356-360, 2005. 

  6. Mao-Hsiung Chiang, Lian-Wang Lee, Chung-Feng Jeffrey Kuo, Yih-Nan Chen, “A Tracking-based Adaptive Sliding Mode Controller for Nonlinear Pneumatic Path Tracking Systems via a Functional Approximation Approach”, International Journal of the Chinese Society of Mechanical Engineer, vol. 30, no. 2, pp. 83-94, 2009. (SCI, Impact Factor: 0.2) (中國機械工程學刊年度(99)最佳論文;中國工程師學會99年度工程論文獎)已被引述7次,不含自我引述

  7. Mao-Hsiung Chiang, Yih-Nan Chen, Lian-Wang Lee, “The Parallel Control of Motion Control and Energy-Saving Control for Electro-Hydraulic Servo Systems using Genetic Algorithm based Loop-Shaping  Control”, International Journal of the Chinese Society of Mechanical Engineer, vol. 30, no. 4, pp. 297-309, 2009. (SCI, Impact Factor: 0.2) 已被引述3次,不含自我引述

  8. Lian-Wang Lee*, I-Hsum Li, Chung-Chieh Chen, “Distance-Based Adaptive Fuzzy Sliding Mode Control for Electro-Hydraulic Pump-Controlled Servo System,” International Journal of Intelligent Systems Science and Technology, vol.2, no. 1, pp. 1-9, 2010. (EI)

  9. I-Hsum Li, Lian-Wang Lee, “A Hierarchical Structure of Observer-Based Adaptive Fuzzy-Neural Controller for MIMO Systems,” Fuzzy Sets and Systems, vol. 185, no. 1, pp. 52-82, 2011. (SCI, Impact Factor: 3.6) 已被引述35次,不含自我引述

  10. Lian-Wang Lee, I-Hsum Li, “Wavelet-Based Adaptive Sliding-Mode Control with H∞ Tracking Performance for Pneumatic Servo System Position Tracking Control,” IET Control Theory and Applications, vol. 6, no. 11, pp. 1-16, 2012. (SCI, Impact Factor: 2.7) 已被引述41次,不含自我引述

  11. I-Hsum Li, Lian-Wang Lee*, “Interval Type 2 Hierarchical FNN with the H-Infinity Condition for MIMO Non-Affine Systems,” Applied Soft Computing, vol. 12, no. 8, pp.1996-2011, 2012. (SCI, Impact Factor: 8.7) 已被引述14次,不含自我引述

  12. Mao-Hsiung Chiang, Chung-Chieh Chen, Lian-Wang Lee, Maoh-Chin Jiang, and Jhih-Hong Lin, “Signed-Distance Fuzzy Sliding Mode Control for an Energy-Saving Electro-Hydraulic Control System,” Applied Mechanics And Materials, vol. 284-287, pp. 2315-2319, 2013. (EI) 已被引述1次,不含自我引述

  13. 李聯旺* 、蔣欣翰、李宜勳、黃軍毅,氣壓肌肉主動式車輛懸吊系統的設計與控制,機械月刊,第四十卷,第十一期,2014年11月號。

  14. Fwu-Hsing Liu, Wen-Hsueng Lin, Ruey-Tsung Lee, Hsiu-Ping Wang,  Lian-Wang Lee, “Bioceramic Scaffolds Manufacturing by Laser 3D Printing,” Applied Mechanics and Materials, vol. 628, pp. 64-67, 2014. (EI) 已被引述1次,不含自我引述

  15. Mao-Hsiung Chiang, Lian-Wang Lee ,and Hsien-Hsush Liu “Adaptive Fuzzy Controller with Self-Tuning Fuzzy Sliding-Mode Compensation for Position Control of an Electro-Hydraulic Displacement-Controlled System,” Journal of Intelligent and Fuzzy Systems, vol. 26, no. 2, pp. 815-830, 2014. (SCI, Impact Factor: 2) 已被引述25次,不含自我引述

  16. I-Hsum Li, Lian-Wang Lee*, Hsin-Han Chiang, Pin-Cheng Chen “Intelligent Switching Adaptive Control for Uncertain Nonlinear Dynamical Systems,” Applied Soft Computing, vol. 34, pp.638-654, 2015. (SCI, Impact Factor: 8.7) 已被引述5次,不含自我引述

  17. Hsin-Han Chiang, Lian-Wang Lee*, “Optimized Virtual Model Reference Control for Ride and Handling Performance-Oriented Semi-Active Suspension Systems,” IEEE Transactions on Vehicular Technology, vol. 64, no. 5, pp. 1679-1690, 2015. CI, Impact Factor: 6.8) 已被引述28次,不含自我引述

  18. Wen-Chiung Hsu, Lian-Wang Lee, Kuan-Hsuan Tseng, Chien-Yu Lu, Chin-Wen Liao and Ho-Nien Shou “Design of Feedback Control for Networked Finite-Distributed Delays Systems with Quantization and Packet Dropout Compensation,” Discrete Dynamics in Nature and Society, vol. 2015, 2015.  (SCI, Impact Factor: 1.4) 已被引述3次,不含自我引述

  19. 陳俊生、李聯旺* 、李進勝、楊進財、鍾岳圳,線性滑軌之鋼珠導引角設計與壽命分析,龍華學報,第三十六期,2015年,第37-46頁。

  20. Lian-Wang Lee, I-Hsum Li, “Design And Implementation of a Robust FNN-Based Adaptive Sliding-Mode Controller for Pneumatic Actuator Systems,” Journal of Mechanical Science and Technology, vol. 30, no. 1, pp. 381-396, 2016.  (SCI, Impact Factor: 1.7) 已被引述24次,不含自我引述

  21. Lian-Wang Lee, Chun-Sheng Chen and Wei-Ren Chen, “Thermal Dynamic Stability of Parametrically Excited Laminated Composite Plates with Temperature-Dependent Properties,” Mechanics of Advanced Materials and Structures, vol. 23, no. 3, pp. 301-310, 2016. (SCI, Impact Factor:2.9) 已被引述2次,不含自我引述

  22. 徐國政 、蔣欣翰 、李聯旺*、呂學儒,適應性模糊滑動模式控制於無刷輪轂馬達驅動之實現,電機技師雙月刊,第三十二期,107年4月,第86-96頁。

  23. 李聯旺*、蔣欣翰、李世榮、陳瑞鵬、湯紹麟、廖榮宗,氣動式下肢步態訓練系統設計與控制,機械新刊,第五期,107年6月,文2-文14頁;

  24. Lian-Wang Lee, Hsin-Han Chiang and I-Hsum Li “Development and Control of a Pneumatic-Actuator 3-DOF Translational Parallel Manipulator with Robot Vision,” Sensors, vol. 19, no. 6, 1495, pp. 1-27, 2019. (SCI, Impact Factor: 4.1) 已被引述14次,不含自我引述

  25. I-Hsum Li, Lian-Wang Lee*, “Design and Development of an Active Suspension System using Pneumatic-Muscle Actuator and Intelligent Control,” Applied Sciences, vol. 9, no. 20, 4453, pp. 1-22, 2019. (SCI, Impact Factor: 2.9) 已被引述6次,不含自我引述

  26. Lian-Wang Lee, Hsin-Han Chiang and I-Hsum Li “Performance Improvement of Active MacPherson Suspension using a Pneumatic Muscle and an Intelligent Vibration Compensator,” IEEE Access, vol. 8, no. 1, pp. 34080-34095, 2020. (SCI, Impact Factor: 4.1) 已被引述3次,不含自我引述

  27. I-Hsum Li, Hsin-Han Chiang, Lian-Wang Lee*, “Development of a Linear Delta Robot with Three Horizontal-Axial Pneumatic Actuators for 3-DOF Trajectory Tracking,” Applied Sciences, vol. 10, no. 10, 3526, pp. 1-21, 2020. (SCI, Impact Factor: 2.9) 已被引述6次,不含自我引述

  28. Chien-Yu Lu, Fei-Hsu Chen, Wen-Chiung Hsu, Lian-Wang Lee, Te-Jen Su, “Development of Smart Refrigerator Based on Message Queuing Telemetry Transport,” Sensors and Materials, vol. 32, no. 5, pp. 1899-1905, 2020. (SCI, Impact Factor: 1.2) 已被引述1次,不含自我引述

  29. Hua Huang, Chun-Sheng Chen, Chih-Chung Hu, Lian-Wang Lee*, Chun-Yao Hsu, “Structure and Mechanical Performance for TiAlN Films that are grown with a Low Al Composition,” Materials Research Express, vol. 7, no. 8, 2020. (SCI, Impact Factor:2.3) 已被引述5次,不含自我引述

  30. Chien-Yu Lu, Kai-Yi Hsueh, Lian-Wang Lee, Ching-Chou Tai, Te-Jen Su, “Designing a shaped balloon machine with a waterwheel mechanism,” International Journal of Modern Physics B, vol. 34, no. 22n24, 2020. (SCI, Impact Factor: 1.7) 已被引述1次,不含自我引述

  31. Lian-Wang Lee*, I-Hsum Li, Ting-Wei Liang, “A Proof of Concept Study for the Design, Manufacturing, and Control of a Mobile Overground Gait-Training System,” International Journal of Fuzzy Systems, vol. 23, pp. 2396-2416, 2021. (SCI, Impact Factor: 4.3) 已被引述1次,不含自我引述

  32. Lian-Wang Lee, Liang-Yu Lu, I-Hsum Li, Chia-Wei Lee, Te-Jen Su, “Design and Control of 6-DOF Robotic Manipulator Driven by Pneumatic Muscles and Motor,” Sensors and Materials, vol. 33, no. 9, pp. 3079-3098, 2021. (SCI, Impact Factor: 1.2)  獲選當期期刊封面 已被引述4次,不含自我引述

  33. Chien-Yu Lu,Rong-Chu Sung, Lian-Wang LeeTe-Jen Su, “Using Infrared Module and Laser Ranging Module to Monitor Tread Pattern of Powered Wheelchair,” Sensors and Materials, vol. 33, no. 9, pp. 3067-3078, 2021. (SCI, Impact Factor: 1.2)

  34. I-Hsum Li, Yi-Shan Lin, Lian-Wang Lee*,  Wei-Ting Lin, “Design, Manufacturing, and Control of Pneumatic-Driven Passive Robotic Gait Training System for Muscle-Weakness Low Limb,” Sensors, vol. 21, no. 20, 2021. (SCI, Impact Factor: 3.9)  已被引述3次,不含自我引述

  35. Chien-Yu Lu, Tsung-Chieh Chang, Lian-Wang Lee, Rong-Chu Sung, Te-Jen Su, “Developing an Optical Measuring System for the Hole Saw Caps,” Symmetry, vol. 13, no. 12, pp. 1-29, 2021. (SCI, Impact Factor: 2.7)已被引述1次,不含自我引述

  36. Lian-Wang Lee, I-Hsum Li, Liang-Yu Lu, Yu-Bin Hsu, Shean-Juinn Chiou, Te-Jen Su*,  “Hardware Development and Safety Control Strategy Design for a Mobile Rehabilitation Robot,” Applied Sciences, vol. 12, no. 12, 5979, pp. 1-26, 2022. (SCI, Impact Factor: 2.9) 已被引述7次,不含自我引述

  37. Hsien-Ru Chu, Shean-Juinn Chiou, I-Hsum Li, Lian-Wang Lee*,  “Design, Development, and Control of a Novel Upper-Limb Power-Assist Exoskeleton System Driven by Pneumatic Muscle Actuators,” Actuators, vol. 11, no. 8, 231, pp. 1-24, 2022. (SCI, Impact Factor: 2.6) 已被引述2次,不含自我引述

  38. Shean-Juinn Chiou, Hsien-Ru Chu, I-Hsum Li, Lian-Wang Lee*, “A Novel Wearable Upper-Limb Rehabilitation Assistance Exo-skeleton System Driven by Fluidic Muscle Actuators,” Electronics,  vol. 12, no. 1, pp. 1-36,, 2023. (SCI, Impact Factor: 2.9) 已被引述2次,不含自我引述

  39. Liang-Yu Lu, Chi-Erh Chang,  Chun-Liang Tung, Chien-Yu Lu,Te-Jen Su, Lian-Wang Lee*, “Application of Digital Visualization in Traditional Manufacturing Transformation,” Sensors and Materials, vol. 35, no. 6, pp. 2139-2148, 2023. (SCI, Impact Factor: 1.2) 已被引述1次,不含自我引述

  40. Liang-Yu Lu, Wei-Lun Huang, Chun-Liang Tung,  Chien-Yu Lu, Te-Jen Su, Lian-Wang Lee*, “Development of Inspection System for Hole Saw Caps,” Sensors and Materials, vol. 35, no. 6, pp. 2149-2158, 2023. (SCI, Impact Factor: 1.2)  獲選當期期刊封面 

  41. Yong-cing Cheng Pin-jui Chen Tzu-hao Lin, Lian-Wang Lee*, “Design and Implementation of Transformable Tracked Robots,” International Journal of iRobotics, vol. 6, no. 1, pp. 17-22, 2023. 

  42. Lian-Wang LeeYing-Hui Yang, I-Hsum Li, “A Design of Pneumatic-Driven Translational Pyramidal Manipulator and Its Actively Disturbance Rejection Tracking Control,” Mechatronics, Accept, 2023. (SCI, Impact Factor: 4.2)

bottom of page